Welcome to Official Website of Zhengzhou Taida Drying Equipment Co,.Ltd!Please call 0086-371-86565118 for more information.

Sitemap| 中文站| Material Tag

YOUR POSITION:Home > TECHNICAL SOLUTIONS

Bean dregs is a kind of materials with high compound water content and oil content. It is hard to eliminate the moisture of bean dregs. Aimed at features of bean dregs, Zhengzhou Taida developed whole set of European style dehydration and drying system. The whole drying system can fully make use of thermal energy. Bean dregs can be heated evenly. Final products are with good color. This whole drying system consumes less energy compared with traditional drying machine. 

Application range】:

used to dry viscous and high-moisture feed factory, livestock farm and agricultural households. 

Applicable materials】:
it is suitable for drying various bean dregs, tofu residue, bean pulp and brewer grains. 

 

Seek Solution

Product Introduction

With the fiercer and fiercer competition in feed industry, it is a trend to industrialize bean dregs. As a professional European-style drying machine manufacturer, Zhengzhou Taida holds tightly this salubrious situation. At present, there are three development prospects for European-style bean dregs dryer.
Production advantage
Based on traditional advantages of European style dryer, Taida innovates the technology of European style dryer. Production efficiency of this new type European style dryer can be increased by 3 to 15 times. Meanwhile, professional production level can be improved. During a certain period of time, this system can produce more quality final products. Furthermore, season change will do little influence to drying effect.
Quality advantages
This whole system holds high professional production level. With stable production process and superior purification condition, this system can improve the quality of final products which can meet export quality standards.
Economic advantages
The usage of European style bean dreg dryer can save a lot of labor force and investment cost. This system can greatly increase the product value. In addition, it can convert resources advantage into economic advantages.
As shown in relevant data, our country enters a bean dreg development times. Bean dregs produced in different areas are increased at different degrees. With the driven of present market, the development of bean dregs dryer will be a long process.
Zhengzhou Taida Group holds an idea that it is with great prospect to improve the profession and drying effect of European style dryer in order to realizes the revolution of bean dreg drying mode.
In addition, it is widely required by bean dreg equipment manufacturers and farmer to list relevant bean dreg dryer to agricultural promotion directory. 

Product Superiority

During proposal design process, we fully take the high moisture content, high protein content and high stickiness of bean dregs into consideration. We adopt a series of unique technology and process to solve these problems in order to guarantee good drying effect.

1. Simple and direct heat transferring mode can save 60% energy. Investment cost can be greatly decreased.
2.The quality of final bean dregs can be greatly improved because drying process and fining process are carried out at the same time. Bean dregs can be dried evenly. There is less nutrition loss in the drying process.
3.With new type exhaust gas utilization process and heat preservation system, energy saving effect can be improved by more than 20%.
4. In the function of centrifuge, shear, collision and friction, heat transfer and mass transfer process can be improved. Correspondingly, the production strength will be improved.
5. Drying air will enter the bottom of dryer and strong swirling flow will be produced, which will form strong washing function for materials sticking to dryer wall. At the high-temperature zone at bottom, thermal-sensitive materials will not contact with hot surface directly. With special device, problems of coking and discoloration of thermal-sensitive materials will be solved.
6. Owing to the high speed of air in drying chamber, retention time of materials will be very short. Then, it will be easy to achieve high efficiency, speediness and high output capacity. There is special devices equipped at drying chamber to control particle size and temperature of discharged materials. Thus, drying requirements for different materials can achieved.
 

 

Technical Process

  After dehydration, bean dregs will be sent to dryer and stirred by lifting plates uniformly set on cylinder. Materials will distribute evenly in dryer and full contact with hot air, which will speed up heat and mass transfer. In drying process, in the function of inclined lifting plate and hot medium, bean dregs will be sent to star discharger at the other end. Then, finished products will be discharged. Production process and technical parameters are figured out based on careful research on bean dregs. Also, these data has been verified. During the process of proposal design, Zhengzhou Taida Group adopts a series of special technology and process to solve problems caused by sticky, high protein content and high moisture content features of bean dregs in order to guarantee good drying effect.
  Bean dregs are added into dryer. In the function of mixer which rotates in high speed, materials will hit each other. Raw materials will distribute evenly in the function of friction and shear. In this way, raw materials will contact fully with hot air. Dehydrated dry bean dregs will rise along with hot air. Graded ring will hold back large particles. Small particles will be discharged from the center of grading ring. Materials which have not been dried fully or large particles will be thrown to cylinder by centrifugal function and be sent to bottom for further crushing and drying. 

 

process flow of Bean Dregs Drying

 

Achievements&Technology

What do we do? 
Established in 1958, Taida group is formerly called Henan state-owned drying equipment factory. This company holds three subsidiary branches, Zhengzhou Taida Drying Equipment Co., Ltd, Zhengzhou Taida mining and metallurgy equipment co., ltd and Henan Zhonglian Taida Machinery Manufacture Co., Ltd. At present, Taida Group holds a R&D center and a drying material pilot test base. Taida can carry out test for various before drying or after drying. Multiple test production lines in Taida pilot test base can meet commissioning requirements for various materials. Taida Group has developed a zhonglian machinery manufacture base, Zhengzhou Longding Industrial Park which can provide customers with complete sets of auxiliary equipment. We are very professional in manufacturing drying equipment. According to your real situation, we can provide you perfect drying solutions.
Why choose us? 
We are the most professional one . it will be your successful beginning to choose us as your reliable supplier. 

Model Screw conveyor drying body  Mixing&dispersing device  Collecting&discharging device Fan Overall Dimensions(W*L*H)
Model   Power  Power  Size 
TDOS- GX200×1.0m 1.1 KW 4-4.5 KW 1.0×3.8m 2.2 KW Valve 5.5 KW 1.5*5.5*2
TDOS- GX250×1.5m 1.1 KW 5.5 KW 1.2×4.5m 3.0 KW Valve 5.5 KW 1.8*5.5*2
TDOS- GX300×1.5m 1.5 KW 7.5 KW 1.5×4.5m 4.0 KW Valve 11 KW 2.5*9.5*2.2
TDOS- GX400×2.0m 1.5 KW 11 KW 1.8×4.5m 5.5 KW 1.5 KW 15 KW 2.8*9.5*2.5
TDOS- GX400×2.0m 1.5 KW 15 KW 2.0×5.0m 7.5 KW 1.5 KW 18.5 KW 3.0*10*2.8
TDOS- GX500×2.0m 2.2 KW 18.5 KW 2.2×5.5m 7.5 KW 1.5 KW 22 KW 3.0*11*3.0

 

 

 

Product Case

Processiong CapabilityView More>>

Order Online

【How to Purchase Our Products】:In order to protect customers' interests, zhengzhou taida group wants to remind you :please order our machine through our official website(http://www.drying-machine.org/)or call our national sales hotline:0086-371-86565118;or send email to:vip@tdaxy.com

Name:
E-mail:
Address:
Message:
 

Contact Us

Sales Hotline:0371-67793637

Technical Support:15515557076

Whatsapp:008618539990967

Email:vip@tdaxy.com

Factory Address: No.198, Longding Industrial Park, Lianhua Road, High-Tech Zone, Zhengzhou City

All Rights Reserved Zhengzhou Taida Drying Equipment Co,. Ltd

Feedback