Welcome to Official Website of Zhengzhou Taida Drying Equipment Co,.Ltd!Please call 0086-371-86565118 for more information.

Sitemap| 中文站| Material Tag

YOUR POSITION:Home > TECHNICAL SOLUTIONS

Aimed at lake and pond sludge, Zhengzhou Taida develops a kind of special sludge drying system which is bases on drying and reduction. It combines new technology. As a kind of mature technology, it can be used to deal with sludge from river way, lake and river pond.

Application range:

               it can be applied to drying sludge from various river way, lake and desulfurized sludge from large and medium sized boiler enterprises. Meanwhile, it can also be used for viscous and high moisture materials. 

 

Applicable materials:

                   various sludge, desulfurized gypsum, hazardous sludge, heavy metal sludge, river way and lake sludge. 

Seek Solution

Product Introduction

Development situation of sludge drying system
There are some popular methods to deal with sludge, such as sanitary landfill, land use, incineration and Burial Ocean. But, for these common problems, there are problems produced, such as secondary pollution, atmosphere pollution and investment cost. According to amount of sludge produced and real situation, we think it is the most reasonable method to blending combustion. Aimed at drying technology, there are some kinds of popular heat sources, hot air, steam, flue gas and etc. without steam source, steal drying will not be achieved. Flue gas needs to cooperate with low temperature large air flow drying system which occupies large area. In addition, the combination of technical parameters is an important element to drying effect. Relatively speaking, there is a wide range of heat source and fuel available. The operation process is very simple.
Taida efficient river and lake sludge drying solution
Have been involved in sludge disposal technology for many years, aimed at disposing desulfurized gypsum and chemical sludge, Zhengzhou Taida developed out a set of sludge treatment equipment based on real situation.
1. Taida sludge drying system can adopt flexible heat sources, such as coal, electricity, microwave, natural gas, LPG, diesel and etc.
2. After drying process, sludge can be mixed with other materials and be sent to boiler for combustion. Dried sludge can also be used for brick making, landfill and compost in order to reach to perfect disposal aim and reduce environmental pollution.
3. The whole system is environmental friendly. It can save energy consumption. 

Product Superiority

1. This system can reduce materials with 90% moisture to appointed standard one time.
2. This system holds great generalization, it can even be applied to deal with liquid materials.
3. Materials routine in dryer can be controlled. Final products can be dry powder or granular materials.
4. Various heat source devices can be chosen for you. It can adopt coal, electricity, oil and natural gas as heat source. It can also apply residual heat of exhaust gas as primary and secondary indirect hot air.
5. Matched with complete system, it can meet your demands from raw material crushing, drying, pelletizing and exhaust gas disposal.
6. Matched with mature residual heat utilization technology, it can recycle residual heat.
7. With compact structure, less area occupation, low noise, less vibration and PLC control, this whole system is reliable and safe. Matched with efficient combustion furnace and exhaust gas purification device, it can realize efficiency, low energy consumption and no pollution. 

 

 

Technical Process

1. Raw materials disposal system
This system will carry out primary disposal for river sludge. In order to save energy, we suggest customers to carry out dehydration first for sludge with 90% moisture content. Taking advantage of sorting and impurity removal system, large particles will be eliminated.
2. Fifth generation European style drying system
New type air swept dryer can reduce the moisture of sludge to below 15% one time.
3. Exhaust gas purification system
Taking advantage of cyclone dust collecting system, bag filter, water spray dedusting system, water scrubber and etc. to eliminate harmful substances and odor in exhaust gas.
4. Finished products disposal system
We can provide pelletizing or granulating equipment to mix sludge with thermal value with other biomass pellets. After pelletizing, finished products can be used as fuel for boiler. We can provide packing system for hazardous matters. After finishing packing of toxic and hazardous sludge, they will be sent to relevant department for further disposal. 

 

 

Achievements&Technology

Why do we do? 
Established in 1958, Taida group is formerly called Henan state-owned drying equipment factory. This company holds three subsidiary branches, Zhengzhou Taida Drying Equipment Co., Ltd, Zhengzhou Taida mining and metallurgy equipment co., ltd and Henan Zhonglian Taida Machinery Manufacture Co., Ltd. At present, Taida Group holds a R&D center and a drying material pilot test base. Taida can carry out test for various before drying or after drying. Multiple test production lines in Taida pilot test base can meet commissioning requirements for various materials. Taida Group has developed a zhonglian machinery manufacture base, Zhengzhou Longding Industrial Park which can provide customers with complete sets of auxiliary equipment. We are very professional in manufacturing drying equipment. According to your real situation, we can provide you perfect drying solutions.
Why choose us? 
we are the most professional one . it will be your successful beginning to choose us as your reliable supplier. 
 

            No.                 Sludge  characteristics                  Solutions 
                1                 High moisture content TDOSC air swept drying system can dry moisture of high-moisture content and viscous materials to standard level.
                2                 Caking  TDOSC air swept rotary wing drying system integrates crushing and drying into a whole. 
                3                Poor fluidity, feeding jams  Patent technology; designed for high moisture and viscous materials. 
              4                Big viscosity, wall sticking and not easy to clean Patent technology; designed for high moisture and viscous materials. 
                5                 Materials are easy to lump; moisture hard to evaporate,  Patent technology; designed for high moisture and viscous materials. 
                6                 Give off odor With anti-explosion device and good seal structure; add one deordorization device for exhaust gas dust collecting system; 
                7                 With corrosive components                  A:In raw material system, materials will mix with neutral materials; 
B: TDOSC air swept rotary wing drying system are made of stainless steel design, if there is no special request from customers. 
                8                 Feed head easy to be burnt out Integrated drying body; durable stainless steel design. 
Revolutionary product, fifth generation drying technology for high moisture and viscous materials!!!

 

Product Case

Processiong CapabilityView More>>

Order Online

【How to Purchase Our Products】:In order to protect customers' interests, zhengzhou taida group wants to remind you :please order our machine through our official website(http://www.drying-machine.org/)or call our national sales hotline:0086-371-86565118;or send email to:vip@tdaxy.com

Name:
E-mail:
Address:
Message:
 

Contact Us

Sales Hotline:0371-67793637

Technical Support:15515557076

Whatsapp:008618539990967

Email:vip@tdaxy.com

Factory Address: No.198, Longding Industrial Park, Lianhua Road, High-Tech Zone, Zhengzhou City

All Rights Reserved Zhengzhou Taida Drying Equipment Co,. Ltd

Feedback