Welcome to Official Website of Zhengzhou Taida Drying Equipment Co,.Ltd!Please call 0086-371-86565118 for more information.

Sitemap| 中文站| Material Tag

YOUR POSITION:Home > TECHNICAL SOLUTIONS

Desulfurized Gypsum Drying

Desulfurized gypsum is widely applied to building material industry. Through different ways, it can almost replace majority of natural gypsum. Comprehensive disposal technology in china has taken steps. The utilization prospect contains a great market opportunity. 

Application range】:
 applied to various thermal power plants, ceramic industry, hospital industry and mould manufacturing industry. Meanwhile, it can also be used to dry high moisture and viscous materials. 
Application materials】:different type desulfurized gypsum, stucco gypsum, casting gypsum, cast industrial gypsum. 

 

Seek Solution

Product Introduction

Present development situation of desulfurized gypsum calcining industry
Proved reserves in eastern region didn’t increase much. Majority of mines has enter to middle and late mining stage. Reserve quantity, output capacity and grades drop down annually. Western regions hold rich resources. Geological conditions: simple and large reserve quantity. But, development and utilization condition are poor. With small market. The proportion of high-grade gypsum is small, only accounts for 1% to 2% of total. The supply problem in gypsum manufacturing industry has become major constraint for relevant enterprises. Therefore, it is very necessary to vigorously develop recycling of desulfurized gypsum.
The application of desulfurized gypsum in cement based materials is a main utilization method for desulfurized gypsum. It is indicated that there is no impurities in desulfurized gypsum which will affect the performance cement-based materials. Desulfurized gypsum is suitable to be used as additives. There is a certain amount of unreacted Caco3 and soluble salt, such as K+and Na+salt elements which is beneficial for speeding up cement hydration and motivate the full volatilization. Because of good fineness of desulfurized gypsum, it can fully mix with cement pellets and composite materials in cement. Quick reaction can effectively adjust cement solidifying time. For slag cement, fly ash cement and compound cement, desulfurized gypsum can works as both retarder and sulfate exciting agent for hydration process of composite materials. Caco3 also can also improve the structure and performance of cement hardened paste.
Having been specialized in desulfurized gypsum calcining and drying for many years, Zhengzhou Taida group developed out complete set of desulfurized gypsum drying disposal technology aimed at desulfurized gypsum, hemihydrate gypsum and stucco gypsum produced from thermal power plants and ceramic industries based on accurate understanding for market.
Characteristics of Taida desulfurized gypsum calcining process

1. Large heat transfer area in unit area; with compact structure and small area occupied.
2. High heat utilization efficiency; steam consumption will not excess 1 t for one ton β gypsum powder.
3. Can use various heat source to meet drying demand for desulfurized gypsum.
4. With exhaust heat recycling device, reduce energy consumption of system.
5. Special gypsum discharger and efficient air swept gypsum dryer developed by Zhengzhou Taida not only fill domestic technology gap, but also guarantee efficient and stable running.
6. There is no secondary dust pollution. Exhaust gas can meet national environmental protection standard. 

 

Product Superiority

1. Large heat transfer area in unit area; with compact structure and small area occupied.
2. High heat utilization efficiency; steam consumption will not excess 1 t for one ton β gypsum powder.
3. Can use various heat source to meet drying demand for desulfurized gypsum.
4. With exhaust heat recycling device, reduce energy consumption of system.
5. Special gypsum discharger and efficient air swept gypsum dryer developed by Zhengzhou Taida not only fill domestic technology gap, but also guarantee efficient and stable running.
6. There is no secondary dust pollution. Exhaust gas can meet national environmental protection standard. 
 

 

Technical Process

According to heating methods, building gypsum processing mode can be divided into two kinds, direct mode and indirect mode.
Direct airflow method

Direct airflow method is a kind of unique and efficient gypsum calcining drying process which is developed by our patent technology. Here are some special features of this system:
Indirect method

1. Can utilize various types of heat sources such as flue gas, coal gas, steal or other accessible hot air.
2. This system holds compact structure and low investment cost. All technical parameters are checked and aligned.
3. According to the temperature of gas source, this system can carry out 180-degree slow calcining process. It can also carry out 300-degree moderate speed calcination. It can also even, 580-degree fast speed calcination is feasible.
4. This system holds low energy consumption. The calcining thermal efficiency will not be over 350000 kcal/ t βgypsum.
5. This system can be used to produce both dehydrate gypsum and semi-hydrated gypsum. It only needs 120-degree temperature to produce dehydrate gypsum. Therefore, this system can utilize low-temperature flue gas from thermal power plants.

Indirect method is a set of drying and calcining integrated process which is developed by our unique patent technology according to real situation of thermal power plants. This equipment can deal with free water and crystal water at the same time. With reasonable structure and design, it is more convenient to adjust product structure and control product quality. This method can be used to produce dehydrated gypsum and superior β gypsum.
Here are some special features of this drying system.

1. It holds larger heat transfer area in unit volume. It holds compact structure and less floor area.
2. It holds higher thermal efficiency. The steam consumption for one ton β gypsum powder will be not over one ton.
3. There are various types of fuels which can meet the requirement of gypsum calcination.
4. With exhaust heat recycle device, it can reduce energy consumption.
5. Zhengzhou Taida unique gypsum discharger and efficient air-swept gypsum dryer fills the technology gap at home. Compared with similar products, it holds higher working efficiency and stable performance.
6. There is no secondary dust pollution. Exhaust emission can meet national standard.

 

 

Achievements&Technology

What do we do? 
Established in 1958, Taida group is formerly called Henan state-owned drying equipment factory. This company holds three subsidiary branches, Zhengzhou Taida Drying Equipment Co., Ltd, Zhengzhou Taida mining and metallurgy equipment co., ltd and Henan Zhonglian Taida Machinery Manufacture Co., Ltd. At present, Taida Group holds a R&D center and a drying material pilot test base. Taida can carry out test for various before drying or after drying. Multiple test production lines in Taida pilot test base can meet commissioning requirements for various materials. Taida Group has developed a zhonglian machinery manufacture base, Zhengzhou Longding Industrial Park which can provide customers with complete sets of auxiliary equipment. We are very professional in manufacturing drying equipment. According to your real situation, we can provide you perfect drying solutions.
Why choose us? 
We are the most professional one. It will be your successful beginning to choose us as your reliable supplier. 
            No.                 Sludge  characteristics                  Solutions 
                1                 High moisture content TDOSC air swept drying system can dry moisture of high-moisture content and viscous materials to standard level.
                2                 Caking  TDOSC air swept rotary wing drying system integrates crushing and drying into a whole. 
                3                Poor fluidity, feeding jams  Patent technology; designed for high moisture and viscous materials. 
              4                Big viscosity, wall sticking and not easy to clean Patent technology; designed for high moisture and viscous materials. 
                5                 Materials are easy to lump; moisture hard to evaporate,  Patent technology; designed for high moisture and viscous materials. 
                6                 Give off odor With anti-explosion device and good seal structure; add one deordorization device for exhaust gas dust collecting system; 
                7                 With corrosive components                  A:In raw material system, materials will mix with neutral materials; 
B: TDOSC air swept rotary wing drying system are made of stainless steel design, if there is no special request from customers. 
                8                 Feed head easy to be burnt out Integrated drying body; durable stainless steel design. 
Revolutionary product, fifth generation drying technology for high moisture and viscous materials!!!

 

Product Case

Processiong CapabilityView More>>

Order Online

【How to Purchase Our Products】:In order to protect customers' interests, zhengzhou taida group wants to remind you :please order our machine through our official website(http://www.drying-machine.org/)or call our national sales hotline:0086-371-86565118;or send email to:vip@tdaxy.com

Name:
E-mail:
Address:
Message:
 

Contact Us

Sales Hotline:0371-67793637

Technical Support:15515557076

Whatsapp:008618539990967

Email:vip@tdaxy.com

Factory Address: No.198, Longding Industrial Park, Lianhua Road, High-Tech Zone, Zhengzhou City

All Rights Reserved Zhengzhou Taida Drying Equipment Co,. Ltd

Feedback